How Is a Metal Roof Repainted by me ?

Metal roofing offers an attractive and eco friendly alternate to conventional asphalt shingle products. Known for its strength and endurance, metal roofing frequently lasts for a long time with comparatively little maintenance or repair. Over time, these roofs normally need pruning to revive their appearance and protect the roof from corrosion and rust. Most DIY homeowners may get this job can be completed over the course of a weekend, leaving the roof looking fresh.

Scrape any loose or flaking paint together with your putty knife. A wire brush or sandpaper may help loosen tough areas of paint.

Remove all rust together with your wire brush or sandpaper.

Sand the entire metallic roof surface very gently with your wire brush or sandpaper. Attempt to reach a slightly abraded, texturized end, as this assists your new paint bond with the roof end.

Add 1 cup of any mild dish or laundry detergent to five gallons of warm water. Use the water and some towels or rags to clean your roof and remove any sanding dust, debris or grease.

Spray the roof with your hose to rinse all debris and soap. Await the surface to dry completely before proceeding with this job.

Coat the entire metallic roof surface with a rust-inhibiting primer. Pick a product designed for use on outside metal applications. Use the primer with a roller, using a paint brush to access small areas or tight corners.

Allow the primer to dry completely before painting. Refer to the instructions on the primer can to calculate drying period.

Paint over the primed roof surface having an acrylic latex paint developed for outdoor metallic applications. Use the paint using a roller or brush as desired.

Await the paint to dry completely, then apply another coat using a roller or brush.

See related